universale Suctiun Cup for Touch Screen - 1 Piece

1.1 Warning

1. Be sure to pay attention to the "warning" section. Improper handling could cause fire, personal injury, or other hazards.

2. Battery Safety Instructions:

Always handle the built-in battery according to the prescribed guidelines! Improper handling may cause accidents, such as leaks, swelling, and other serious events that endanger personal safety and property.

(1) It is prohibited to use heating equipment such as a hot air gun or hot air drum to directly heat the battery;

(2) It is prohibited to use sharp objects and tools , make direct contact with the battery surface, and remove auxiliary materials on the battery surface;

(3) A battery wrapped with easily tearable tape must have the tape replaced with a new one after disassembly. It is prohibited to reuse easily tearable tape;

(4) It is forbidden to reuse deformed, damaged, and non-adhesive double-sided tape of the battery and its handling position;

(5) It is forbidden to mix the battery with any other items and must be stored separately;

(6) Check the appearance of the battery and prohibit the use of batteries with holes, bulges, leaks, or severe deformation ;

(7) When assembling the battery, it is necessary to ensure that there are no foreign objects on the surface of the battery and in the battery compartment;

3. If you need to replace a broken screen, be sure to take appropriate protective measures, such as wearing safety glasses and cut-resistant gloves. Additionally, it is recommended to use non-slip pads to stabilize the phone during the operation and avoid further damage caused by accidental slipping. At the same time, care should be taken to prevent glass fragments from falling into the phone during the operation.

1.2 Caution

1. Pay attention to the part marked "Caution" and be careful during the operation. Failure to follow these precautions could result in data loss on the phone, hardware damage, or other damage.

2. Maintenance and calibration must be performed in strict accordance with this guideline.

3. Use only the materials listed in the bill of materials for maintenance service.

4. All accessories must be assembled in the designated location as required.

5. Electrostatic discharge is the main cause of damage to sensitive components in electronic products. Please operate in strict accordance with the electrostatic protection requirements of accessories.

6. Professional maintenance personnel must possess the technical skills to repair smart mobile phones and must have purchased relevant insurance to cover liabilities arising from their professional activities.

Note: realme will not be liable for any property damage, personal injury, or other safety issues caused by failure to follow the repair and maintenance instructions. realme's liability under applicable product liability laws is not affected. Maintenance by unauthorized repairers may void the warranty of the entire device. For details, please refer to the official warranty policy.

2. General Maintenance Information

(1) Please pay attention to electrostatic discharge (ESD) protection and wear an ESD anti-static ring.

(2) It is recommended to wear anti-static gloves to avoid oil stains and fingerprints.

(3) Protect the screen, camera, and camera lens with protective films to prevent dust and scratches.

(4) The exterior should be cleaned with a dust-free cloth, an anti-static brush, and an applicable organic solvent (including, but not limited to, alcohol or isopropyl alcohol). Other items (such as erasers) should not be used for cleaning, to avoid scratching the protective layer on the surface and causing it to oxidize and corrode.

(5) If the soldered mechanical parts (except the shielding cover and shielding frame parts) fail, they cannot be repaired and must be replaced.

(6) Please use the original accessories.

(7) The devices provided by realme must be used to test the phone's proper functioning. For example, if the customer reports a malfunction with the charging function, please use the original realme adapter for testing to ensure the accuracy of the test results.

(8) If you have any questions regarding repair services for this product, please contact the official realme service website at the following link: https://www.realme.com